{"title":"Car accessories","description":"","products":[{"product_id":"lighted-skull-trailer-hitch-balls-cover","title":"Lighted Skull Trailer Hitch Balls Cover","description":"\u003cp\u003eGive a unique touch to stand out from the crowd to your truck with this trailer hitch cover, powered from your car no batteries required. \u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003e3D printed with PLA filament and designed to fit your hitch, with an adapter that allows you to tighten as the figure screws into the base, preventing loss while driving.\u003cbr\u003eYou can select at the time of purchase between modes: \u003cbr\u003e* Always on: the yellow light stays on all the time and a red light also comes on when the indicators are activated and \/ or brake.\u003cbr\u003e* Brake only: Only lights up red when the turn signals or brakes are activated.\u003cbr\u003eThere is no way to switch from one mode to another after purchase since different lights and hardware are used for each. \u003cbr\u003eThis is an energy efficient lamp and although the LEDs are very bright, their effect can be diminished in bright conditions, they look much better in the dark.\u003c\/p\u003e\n\u003cp\u003eThe default lights color are amber and red but you can select between:\u003cbr\u003e* amber\u003cbr\u003e* red\u003cbr\u003e* pink\u003cbr\u003e* blue\u003cbr\u003e* sky blue\u003cbr\u003e* green\u003cbr\u003e* white\u003cbr\u003efor a custom order.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003cbr\u003e* The connection is made through a 23 inch long cable with a 4 Way Flat Trailer connector. Please make sure that your vehicle has this type of connector before purchasing, otherwise you can add a note to the purchase for a different connector.\u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e\n\u003cp\u003eLast but not least \u003cbr\u003eIf this product does not convince you, do not go away, take a look at our other products in our section of Tow hook ornaments here https:\/\/www.etsy.com\/shop\/3D2Designs?ref=seller-platform-mcnav\u0026amp;section_id=34835527\u003c\/p\u003e\n\u003cp\u003eAnd remember that we also do custom orders, just write us and share your idea and we will get back to you ASAP.\u003c\/p\u003e\n\u003c!----\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":45407317459172,"sku":"","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_340x270.5184912320_o6q9.jpg?v=1720897507"},{"product_id":"skull-trailer-tow-hook-ball-hitch-cover","title":"Skull Trailer Tow hook ball  hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). This item is not painted, but printed in the filament of the selected color.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e\n\u003cp\u003eLast but not least \u003cbr\u003eIf this product does not convince you, do not go away, take a look at our other products in our section of Tow hook ornaments here https:\/\/www.etsy.com\/shop\/3D2Designs?ref=seller-platform-mcnav\u0026amp;section_id=34835527\u003c\/p\u003e\n\u003cp\u003eAnd remember that we also do custom orders, just write us and share your idea and we will get back to you ASAP.\u003c\/p\u003e\n\u003c!----\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":45407319884004,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_340x270.3239127347_3jty.jpg?v=1720897584"},{"product_id":"decorative-skull-front-plate","title":"decorative skull front plate","description":"\u003cp\u003eStand out on the road with this unique detail for the front license plate, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003ewhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and an additional replacement are sent). This item is not painted, but printed in the filament of the selected color and glued on a metal plate that is attached with screws to the front of your vehicle, we have 8 variety of colors for the plates\u003c\/p\u003e\n\u003cp\u003ebefore buying\u003cbr\u003e*3D printing is not an exact science, there is no perfect finish, normally the models show lines between layers, as well as some support marks and seams. Our team works to minimize these defects in each product, however they may still be there.\u003cbr\u003e* If you are not familiar with the finishing of 3D printing parts, we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model.\u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Negro","offer_id":46037763948772,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Gris","offer_id":46037763981540,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Rojo","offer_id":46037764014308,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Blanco","offer_id":46037764047076,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Azul","offer_id":46037764079844,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Amarillo","offer_id":46037764112612,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Plateado","offer_id":46037764145380,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.5595939732_i90b.jpg?v=1738852731"},{"product_id":"hand-painted-deadpool-skull-trailer-tow-hook-ball-hitch-cover","title":"Hand-painted Deadpool skull Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003eOne might imagine that Deadpool would never die, this proves the opposite. Here is a fusion between a skull and the iconic deadpool mask. This product is hand painted using a rustic technique simulating weathering. The painting is finished with gloss varnish to protect it from humidity and sun. Printed with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). \u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46037764997348,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_340x270.5404022625_no02.jpg?v=1738852991"},{"product_id":"devil-trailer-tow-hook-ball-hitch-cover","title":"Devil Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). This item is not painted, but printed in the filament of the selected color.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46037765521636,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_340x270.3250544551_rjnx.jpg?v=1738853062"},{"product_id":"eagle-trailer-tow-hook-ball-hitch-cover","title":"Eagle Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). This item is not painted, but printed in the filament of the selected color.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46037767618788,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.3191435190_6zri.jpg?v=1738853312"},{"product_id":"hand-painted-pumpkin-skull-trailer-tow-hook-ball-hitch-cover","title":"Hand-painted pumpkin skull Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003eA skull fused with a pumpkin, is there anything more original than this for Halloween? This product is hand painted using a rustic technique simulating weathering. The painting is finished with gloss varnish to protect it from humidity and sun. Printed with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). \u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038519349476,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.5355754814_j9aa.jpg?v=1738869812"},{"product_id":"hand-painted-spiderman-skull-trailer-tow-hook-ball-hitch-cover","title":"Hand-painted Spiderman skull Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003eFinally it seems that the arachnid sense ended up betraying Spiderman. Here is a fusion between a skull and the iconic Spiderman mask. This product is hand painted using a rustic technique simulating weathering. The painting is finished with gloss varnish to protect it from humidity and sun. Printed with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). \u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038521708772,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.5355897070_8oeh.jpg?v=1738869924"},{"product_id":"hand-painted-captain-america-skull-trailer-tow-hook-ball-hitch-cover","title":"Hand-painted Captain America skull Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003eLooks like Captain America is pretty dead huh? Here is a fusion between a skull and the iconic Captain America mask. This product is hand painted using a rustic technique simulating weathering. The painting is finished with gloss varnish to protect it from humidity and sun. Printed with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). \u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038523805924,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.5403992469_bjvx.jpg?v=1738870035"},{"product_id":"balls-trailer-tow-hook-ball-hitch-cover","title":"Balls Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). This item is not painted, but printed in the filament of the selected color.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038614769892,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.3570631620_ru9q.jpg?v=1738872492"},{"product_id":"machine-gun-trailer-tow-hook-ball-hitch-cover","title":"Machine gun Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). This item is not painted, but printed in the filament of the selected color.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038738960612,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.3250543857_bwvo.jpg?v=1738873758"},{"product_id":"hand-painted-darth-maul-skull-trailer-tow-hook-ball-hitch-cover","title":"Hand-painted Darth Maul skull Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003eWho would have thought that Darth Maul's tattoos would be so deep? Here is a fusion between a skull and the iconic Darth Maul face. This product is hand painted using a rustic technique simulating weathering. The painting is finished with gloss varnish to protect it from humidity and sun. Printed with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). \u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038753018084,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.5355903010_swv7.jpg?v=1738874013"},{"product_id":"hand-middle-finger-trailer-tow-hook-ball-hitch-cover","title":"Hand Middle Finger Trailer Tow hook ball \/ hitch cover","description":"\u003cp\u003eStand out on the road with this unique detail for your tow ball, give a personalized touch to your vehicle.\u003c\/p\u003e\n\u003cp\u003eWhat we sell\u003cbr\u003ePrinted with PLA, it offers excellent weather resistance and durability. The ornament consists of the main decorative piece and adapters (one adapter and one additional spare is shipped). This item is not painted, but printed in the filament of the selected color.\u003c\/p\u003e\n\u003cp\u003eImprovements\u003cbr\u003e* No more broken adapters, we have changed the alignment as the amount of infill when printing, making them almost indestructible.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003cbr\u003e* Snap the adapter onto your tow ball and simply screw the attachment on, tighten until you get a snug fit, however do not over tighten the threads. \u003cbr\u003e* Rotate the attachment so that the ornament faces perfectly backwards. \u003c\/p\u003e\n\u003cp\u003eBefore you buy\u003cbr\u003e* 3D printing is not an exact science, there is no perfect finish, usually the lines between layers are noticeable in the models, as well as some support marks and seams. Our team works to minimize these defects in every product, however they can still be there. \u003cbr\u003e* If you are not familiar with the finish of 3D printing pieces we advise you to look for some reference images on the internet before purchasing.\u003cbr\u003e* Keep away from excessive heat, such as inside your car in the sun for a long time to avoid deformation of the model. \u003c\/p\u003e","brand":"3D2designs","offers":[{"title":"Default Title","offer_id":46038770516196,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/files\/il_fullxfull.3202840636_j0l4.jpg?v=1738874191"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/7297\/3284\/collections\/il_340x270.3191434306_puej.jpg?v=1760463722","url":"https:\/\/3d2designs.myshopify.com\/collections\/car-accessories.oembed","provider":"3D2designs","version":"1.0","type":"link"}